Quick Start

There are several ways to set up your BrightSign player. Choose the method that will work best for you:

  • On-Device Setup: Connect a display and blank microSD card, along with a keyboard or Ethernet cable, to your player and power it on. Follow the on-screen instructions to set up the player.
  • BrightAuthor Setup: Use the BrightAuthor PC application to generate setup files for your player. Follow Steps 1-2 below to use this method.
  • BDeploy: If you are creating a new BSN network, you can bulk add players to your network using their serial numbers. When you connect players to the Internet out of the box, they will perform device setup automatically and connect to your network.

Once you've set up your player, follow Steps 3-4 below to set up your player and publish content to it.

If you want to play content immediately without setting up the player, follow the Quick Play Instructions below.

Quick Play Instructions

  1. Download sample video or audio content for your player. You can use your own content as well, but first make sure that your video, image, or audio content is supported on BrightSign players.
  2. Place the content on the root folder of your SD card (e.g. "SD:/").
  3. Turn off the BrightSign player by unplugging the power adapter (or Ethernet cable if the unit is being powered by PoE).
  4. Insert the SD card into the player.
  5. Turn on the player by reconnecting the power. The content will begin playing after a few moments.

Note: Content files on an SD card will play alphabetically in a continuous loop.

#

Step 1 – Get the Software You Need

Click here, select your player model, and download the Official Release of BrightAuthor software.

Note: BrightAuthor is not supported on Mac. However, there are still several ways to publish presentations using a Mac: See this FAQ for more details.

Install BrightAuthor on your PC. If needed, additional installation instructions are available on the Video Tutorials page:

Step 2 – Set up the Player

Follow these steps to set up your BrightSign player:

Note: These instructions outline the setup process for the Local File Networking publishing method. You can use this method to publish presentations to your player via SD card or over your local network.

See additional player setup instructions to learn about all player setup methods including B-Deploy and On-Device Setup.

The Player Setup Introduction tutorial video will teach you about publishing methods other than Local File Networking.

#

  1. Open BrightAuthor.
  2. Navigate to Edit > Preferences > Networking. Check Enable BrightSign Local Networking.
  3. Navigate to Tools > Setup BrightSign Unit.
  4. Enter a Name for your unit. The Description is optional.
  5. (Optional) Check Enable wireless if you plan to connect the player to the network via WiFi (this requires a Wireless Module and a compatible model). Enter the credentials of the wireless network.
  6. (Optional) Click Advanced Network Setup and navigate to the Wired/Wireless tabs to configure the player's Internet connection settings. Choose one of the following options:
    1. Obtain an IP address automatically: The player will use DHCP to obtain an IP address. If you choose this option, we recommend using Bonjour to publish to the player over the local network.
    2. Use the following IP address: The player will use the IP settings you enter in the fields. Contact your network administrator for more details.
  7. Specify the Time zone where the player is located.
  8. Click Specify Firmware Update.
    1. Select the Minimum Compatible Release version of firmware for your player model.
    2. Click OK.
  9. Check Enable local web server, then enter a User name and Password. You will need these credentials later if you want to publish to the player over the local network.
  10. Select Networked with Local File Networking.
  11. Click Create Setup Files.
  12. Select an SD card to store the setup files and click OK. It may take several minutes for the setup process to complete.

Note: We recommend formatting your SD card using FAT32. Formatting your card using NTFS allows you to play media files that are 4GB or larger in size, but the player will not be able to receive network updates or generate logs.

  1. Turn off the BrightSign player by unplugging the power adapter (or Ethernet cable if the unit is being powered by PoE).
  2. Insert the SD card into the player.
  3. Turn on the player by reconnecting the power. The connected display device will indicate when setup is complete.

The SD card must remain installed on the BrightSign player during playback and networking operations. Because the player has no internal storage, it cannot play presentations or receive content over the network without a storage device connected.

Step 3 – Create a Presentation in BrightAuthor

Use BrightAuthor to create a presentation for your player. Choose one of the following modules to get step-by-step instructions and a sample BrightAuthor presentation:

Step 4 - Publish the Presentation to Your Player

Once you have set up your player and created a presentation, you can use BrightAuthor to publish the presentation to your player. The following steps outline how to publish a presentation using an SD card.

Note: If you have set up your player for Local File Networking, you can also use BrightAuthor to publish content over your local network. View this tutorial video to learn more.

#

  1. Insert an SD card into your computer’s card reader.
  2. Navigate to Publish > Local Storage.
  3. Click the Browse button, select the folder where your presentation is saved, then click OK.
  4. Drag your presentation from the list into the calendar to set a time when the presentation will play. You can expand or contract the time range by clicking, holding, and moving the lower border of the colored field.
  5. Double-click the presentation in the calendar to further customize the play schedule:
    1. (Default) The presentation plays during a limited time range on a single, specific day. Customize the range by changing the Start and End times in the Event time field.
    2. Active all day, every day: Check this box to have the presentation play continuously without interruptions or end times/dates.
    3. Recurring Event: Check this box to have the presentation play for a limited time during a recurring pattern of days. Use the Range of recurrence field to choose what dates the recurring event will begin and end.

Note: You can drag and drop multiple presentations into the calendar to schedule different presentations at different times; you can even have one schedule interrupt the other for a set period of time.

  1. Click Browse, locate the root folder of your SD card, then click OK.
  2. Click Publish. Wait for the Publish Complete notification to appear.
  3. Turn off the BrightSign player by unplugging the power adapter (or Ethernet cable if the unit is being powered by PoE).
  4. Insert the SD card into the player.
  5. Turn on the player by reconnecting the power. The presentation will begin playing after a few moments.

Step 5 – Further Steps

Once you have your player set up and running content, you can follow these links to learn more about advanced BrightSign topics:

  • Documentation: Get up-to-date user guides, tech notes, API reference manuals, hardware manuals, and regulatory information.
  • FAQs: Search our knowledge base for specific questions and advanced topics.
  • Demos: Get more presentation examples, which provide an overview of advanced BrightSign features.
  • Support: Contact support if you are having trouble with your BrightSign player.

About Us

BrightSign, LLC is a privately held company located in Los Gatos, California founded in 2002 by Anthony Wood, the inventor of the digital video recorder (DVR) and Roku. BrightSign is the global market leader in digital signage media players, as named by IHS in its 2013, 2014 and 2015 "Global Market for Digital Signage" research studies which report market share of all media players and PC-based signage solutions combined. BrightSign players are known for their signature reliability, affordability and ease-of-use by the commercial digital signage market worldwide.

Read more »

Contact Us

United States 1-408-852-9263

Global: +44 122 329 8500

Email: sales@brightsign.biz

To contact BrightSign about sales inquiries, existing orders and other issues, please click here.